220 NUDE BEIGE Semilac STEP ONE Hybrid / Gel Polish 5 ml Bottle
DISCOVER THE INNOVATIVE SEMILAC ONE STEP HYBRID GEL POLISH IN A BOTTLE
You have never tried a hybrid manicure and you dream of a beautiful, perfect nails? Especially for you, we have created a product with which your first hybrid manicure will be child's play.
The Semilac One Step Hybrid Gel Polish varnish does not require the use of a base or top. One product is enough, thanks to which you can do the manicure quickly, easily, and pleasantly!
does not require the use of a base and top coat
gel polish is easy and quick to remove
beautiful color and shine
nails are strengthened during wear, which allows you to grow nails
COLOR: NUDE BEIGE
Stunning classic Nude color is a great choice for both short and long nails. Combine it with your favorite jewelry to give it an elegant finish.
SEMILAC ONE STEP HYBRID - INSTRUCTIONS FOR USE:
STEP 1 - Shape the nail plate and polish the nail plate, degrease the nails with Semilac Nail Cleaner.
STEP 2 - Paint the nails with a thin layer of varnish, also paint the edge of the nail.
STEP 3 - Cure in the lamp. Repeat steps 2 and 3, until the color coverage is satisfactory.
STEP 4 - Wipe the nails with a cotton pad soaked in Semilac Nail Cleaner.
STEP 5 - Polish the nails with an olive or a polisher with a grade of 4000.
STEP 1 - Soak Semilac Remover Wraps pads with acetone or Semilac Remover liquid.
STEP 2 - Apply cotton pads to the nail plate and wrap each finger carefully with foil for 10-15 minutes.
STEP 3 - Remove the foils and remove the varnish with a wooden stick or pusher. If the varnish does not come off, repeat step 1&2
STEP 4 - Even out the surface of the nail plate with a Semilac polishing block.
STEP 5 - Apply manicure oil
We recommend applying 3 layers of the product
CURING TIMEUV LED 9 W lamp - 2 x 60 secUV LED 24 W lamp - 2 x 60 sec.Lamp UV LED 36 W - 2 x 30 sec.Lamp UV LED 48/24 W - 60 sec.UV lamp 36 W - 120 sec.
Ingredients: Di-HEMA Trimethylhexyl Dicarbamate, HEMA, Isobornyl Methacrylate, Cellulose Acetate Butyrate, Glycol HEMA-Methacrylate, Hydroxycyclohexyl Phenyl Ketone, Trimethylbenzoyl Diphenylphosphine Oxide, PEG-9 Dimethacrylate, Silica, Bis(Methacryloyloxyethyl) Phosphate, Hydroquinone, p-Hydroxyanisole, (+/-) CI 77891, CI 15850, CI 15880, CI 77007, CI 42090, CI 77491, CI 77492, CI 77499, CI 19140, CI 45410, CI 47005, CI 73360, CI 77266.
Hybrid varnishes should be applied to the nail plate in the form of thin layers (too thick layers, in particular of highly pigmented varnishes, may prevent the product from hardening properly).
The recommended hardening times of the products should be adhered to. When placing your hands under the lamp, make sure that the manicure is evenly lit - thumbs may be a vulnerable place.
Take care of the maintenance of your lamp - keep it clean so that its light is not limited by dirty diodes / bulbs / base. In the case of a traditional UV lamp, remember to regularly replace the fluorescent lamps (every 3-6 months, depending on the intensity of use).
During application, avoid direct contact of hybrid varnishes with the skin - any dirt should be immediately cleaned with a cotton swab soaked in Nail Cleaner or removed with a stick. Spilling hybrid varnish on the skin may cause an allergic reaction. In case of irritation or hypersensitivity, discontinue use. Products should be used in well-ventilated rooms. Avoid contact of the product with the eyes. If the product comes into contact with the eyes: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, seek medical attention. If in doubt about the safe use of the product, please contact the manufacturer/seller.